Diamond Fluorescence: What You Need to Know
Diamond fluorescence is a misunderstood factor. It has a bad rep, but in many cases, it could be good. Read on to learn how fluorescence affects price and appearance.
Fluorescence is one of the most misunderstood characteristics of diamonds. Is it bad and to be avoided? Or does it not really matter? And why do some people want it??
Fluorescence is generally seen as undesirable. But this is not necessarily true. If you're not careful, fluorescence can have a negative effect. But in some cases, it can make the diamond not only look better, but reduce the cost as well.
We're here to shine some light on this subject. We'll go over what it is, when to avoid it, and why you may want it.
What Is Fluorescence in Diamonds?
Fluorescence is when a diamond shows a soft glow under ultraviolet (UV) light. This is caused by certain minerals in the diamond. This effect is totally natural, appearing in a third of all diamonds.
Most diamonds with fluorescence will glow blue. Less than 5% of fluorescent diamonds will glow yellow, green, orange, or white.
UV light is like those black lights from back in the 80's. You know... the ones that make your teeth hilariously white. And of course, the sun also gives off UV light. So in some cases, diamonds with very strong fluorescence will have an icy-blue color in sunlight.
However, too many diamond retailers started using this term to sell their low-quality diamonds. This led to the Federal Trade Commission (FTC) banning the term in 1938. Since then, diamonds with blue fluorescence were thought to be generally bad.
Levels of Fluorescence
© CreditDonkey |
Fluorescence is determined by viewing the diamond upside-down under UV light. The different levels of fluorescence will impact a diamond's price and appearance.
Here is how GIA (Gemological Institute of America) grades fluorescence. We also go over the general impact of the different levels.
- None: Diamond has no glow at all under UV light. Diamonds without any fluorescence are the purest and therefore, will usually be priced the highest.
Tip: For diamonds graded by AGS (American Gem Society), you'll see the term "Negligible" instead. This is the same as GIA "None". It refers to diamonds with no fluorescence at all or fluorescence so minuscule that it's not worth mentioning.
- Faint: Diamond has a very light blue glow under UV light. Faint fluorescence makes no visible impact. However, for higher diamond color grades (D - G), you can save a few bucks as there will usually be a slight discount.
- Medium: A blue glow is easily seen under UV light. Medium fluorescence usually has no negative impact. In fact, it can help make a diamond with a slight yellow tint (H - K) appear whiter.
- Strong - Very Strong: A deep blue glow is very clearly seen under UV light. A strong fluorescence can make a diamond appear hazy or milky, especially if it's a diamond with higher color (G and above).
Worried that a fluorescent diamond won't be as good? With many of them, you can only tell under UV lights.
Strong Fluorescence Makes a Diamond Hazy
Fluorescence tends to have a greater negative effect on colorless diamonds (G and above). Colorless diamonds with Strong - Very Strong fluorescence may appear cloudy and oily. This makes the diamond look less transparent. Often, even a casual observer can see the difference when compared to a diamond with no fluorescence.
In the above example, the diamond on the left has a strong fluorescence. For comparison, I've placed a diamond with no fluorescence next to it. But keep in mind that this level of haziness is a rare case.
Usually, a strong fluorescence doesn't cause as much haziness in diamonds H or lower. But it's still a possibility. So it's best if you can inspect the diamond in person.
But Fluorescence Can Enhance a Diamond Too
Fluorescence improves the color of diamonds with lower color grades (H and below). Diamonds below H have a faint yellow tint, and a medium-strong blue fluorescence can help make it look whiter by counteracting the yellow. Usually, a diamond can look one whole color grade higher.
This is great because you can save some money. Diamonds lower in color grade are significantly cheaper. So you can save a ton by buying a diamond lower in color with fluorescence, while having it appear whiter.
Fluorescence and Pricing
Here's the good part! Since fluorescence is generally thought of as a bad thing, diamonds with this quality are often sold at a reduced price.
Here's how it usually works:
- Diamonds with faint fluorescence are priced the same (no discount), except for diamonds G and above in color. You may see a slight discount of 1%.
- Diamonds with medium fluorescence have a slight discount (2-7%) if the color is H or above.
- Diamonds with strong - very strong fluorescence have a bigger discount (3-15%) if the color is H or above.
But remember - fluorescence can improve the color of diamonds with lower color grades. So in these cases, that's factored into the price. In diamonds with color I or below, a medium fluorescence can even increase the price a bit by 2-3%.
Save Money by Buying a Diamond with Fluorescence
The main reason to consider a diamond with fluorescence is the attractive savings potential. Diamonds lower in color cost a lot less. But one with medium - strong fluorescence can make it look like a more pricier, whiter diamond.
For example:
- A 1-carat, H, VS2 round diamond with an excellent cut costs around $5,500 - $6,000.
- With all other characteristics the same, a diamond with the color I and strong fluorescence cost around $5,000. But it can look as white as an H diamond.
However, you will need to make sure the fluorescence does not cause haziness. If you're buying online and can't examine the diamond in person, make sure the retailer is trustworthy and will give you an honest opinion.
Where to Buy Diamonds with Fluorescence
Brian Gavin is one of our favorite online retailers. It specializes in high quality super ideal cut diamonds. And another unique thing about this retailer is that it offers several product lines. One of which is "Brian Gavin Blue". This line offers diamonds with medium - strong fluorescence.
Each diamond in the Blue line has been inspected by Brian Gavin himself to ensure that the fluorescence has no negative effect. Each diamond is still super ideal cut with top quality light performance.
In other words, these are among the highest quality diamonds with fluorescence you'll find.
Bottom Line
To re-cap, here are some of the most important points:
- Fluorescence causes the most negative impact in diamonds with high color grades (G or above). A strong fluorescence can result in haziness.
- Medium to strong fluorescence improves the color of diamonds with lower color grades (H or below).
- Diamonds with medium - strong fluorescence are usually sold at a reduced price. However, if it improves the color of the diamond, it may then have a small markup.
- Faint fluorescence has no effect at all, on appearance or price.
Really, how you view fluorescence depends on your personal taste. There is nothing wrong with having fluorescence, just as long as the diamond does not appear hazy. Personally, I think fluorescence makes a diamond more unique. And a slight blue glow can be very pretty. It's also a GREAT way to improve the color of a diamond without the extra cost.
Just beware: a strong fluorescence could impact diamond appearance, so it's best if you can examine those stones in person.
Write to Anna G at feedback@creditdonkey.com. Follow us on Twitter and Facebook for our latest posts.
Note: This website is made possible through financial relationships with some of the products and services mentioned on this site. We may receive compensation if you shop through links in our content. You do not have to use our links, but you help support CreditDonkey if you do.
Read Next: